How to Renovate Your Lawn with Topsoil

A complete guide to using topsoil to level, topdress, and renovate your lawn — including how much you need and how to apply it. This guide covers everything you need to know to plan, estimate, and complete your project with confidence.

Key Formulas and Reference

All material calculators on HowMuchCalcs use the same foundational formula:

Volume (cu ft) = Length × Width × (Depth ÷ 12)
Volume (cu yd) = Cubic Feet ÷ 27

For count-based materials (tiles, pavers, sod rolls), divide your total area by the area of one unit, then multiply by your waste factor (typically 1.05–1.20).

Step-by-Step Project Planning

Overview of how to renovate your lawn with topsoil

1. Measure your area (length and width in feet)
2. Determine the required depth or coverage for your material
3. Enter dimensions in the relevant calculator
4. Add 10% buffer to the result
5. Get quotes from at least 2 local suppliers
6. Order materials and schedule delivery

Common Mistakes to Avoid

Project planning and measurement

• Not measuring the area before heading to the store
• Forgetting to add a waste factor (always add 10%)
• Confusing cubic feet and cubic yards (27 cu ft = 1 cu yd)
• Ordering from a single supplier without comparing prices
• Not accounting for material compaction after installation

For a complete guide to all material calculators and how to use them, see our Ultimate Guide to DIY Material Calculators.

Material close-up